Menu
Cart 0

9 Led Flush Mount Boat Transom Lights (12 – 14.5 vdc) charging battery - White

Loomis LED

  • 7495


Includes:
1 – 2.36″ dia x 1.42″ high flanged pvc flush mount fitting light assembly
2 – 6-32 stainless steel screws
20′ – 24 awg military grade Teflon twisted pair silver or tin coated copper wire

Size

9 leds

Color

White

The ultimate led transom lights!!

Available  9 led versions with 3 watt leds, in blue, green or white. Incredibly durable, totally corrosion proof, extremely bright and very efficient. No expensive current or voltage drivers are needed! The current is controlled by the size and length of the wire. There is nothing to corrode as everything is pvc and epoxy resin sealed for life.

Housed in an attractive gray 2 inch diameter flanged pvc flush mount fitting that is only 1.5 inches tall. Two 6-32 stainless steel screws supplied for mounting each light. Each light is supplied with 12 feet of military grade Teflon twisted pair silver coated copper wire in 22awg.

Each light is hand made and warrantied for 2 full years although once hooked up and working they will outlast all of us with 30000 hour lifetime.

Nothing to corrode and totally waterproof for years of use. A thin layer of Vaseline on the window will prevent marine growth.

Notes:

  • Lights can be run for 0-2 min out of the water but for longer times they have to be underwater for cooling purposes and mounted to the transom!
  • All lights are hooked up in parallel with each other on your boat-no special current drivers needed.
  • I supply all wiring instructions in a clear manner and mounting brackets for adjustable tube design.
  • I use these for nighttime tuna, sword fishing and striped bass. They attract all sorts of marine life which in turn attract the game fish.
  • In clear water they will light up 50+ feet around the boat depending on mounting angles and water clarity.
  • Do not stare directly into the light for any length of time as these are bright and will damage your eyes!
  • The leds are embedded in a crystal clear waterproof epoxy and heat sinked to a large block of aluminum surrounded by pvc with an acrylic window and military spec silver coated Teflon wire (20 feet supplied which is adequate for most boats from transom to inside of hull). There is nothing to corrode as the wire, connections and led are all surrounded by waterproof epoxy.
  • Blue light will travel farther than green so the 600 lumen blue actually illuminates a slightly bigger area. Green are for fish and blue is for beauty!

IMPORTANT-The lights are designed to be directly hooked up to a 12-14.5vdc charging or non charging battery.  Do not worry about draining your battery-these only draw  2-2.5A (9 leds) each and a deep cycle battery will last many days and nights!

Specifications:

9 led flush mount gray transom light (12-14.5vdc)

  • Size: 2.36″ dia x 1.42″ high
  • Wire: 20 feet 24awg Teflon twisted pair military grade wire
  • (2) 6-32 stainless mounting screws supplied
  • Color: White
  • Lumens: 1,200 White
  • Watts: 27
  • Current: 2.1 Amps

9 led flush mount gray transom light (12-14.5vdc battery only)

  • Size: 2.36″ dia x 1.42″ high
  • Wire: 35 feet 22awg Teflon twisted pair military grade wire
  • (2) 6-32 stainless mounting screws supplied
  • Color: White
  • Lumens: 1,800 White
  • Watts: 27
  • Current: 2.1 Amps

Warranty: 2 years excludes return shipping.

Installation Instructions: Two small mounting holes need to be drilled for each light. I recommend 3M 5200 on screw threads before screwing in mounting screws. Wires can be fed through existing transducer holes, over the transom or a small ¼ inch hole drilled above waterline for feeding wires into hull.

For cooling purposes lights are designed to run under water.

*All International Orders may require additional shipping charges depending on location.

We Also Recommend